Page 1
OMRON's original wiring-saving connector, which was inher- to understand at a glance. The E3X-NA uses the LED bars to ited from the digital fiber amplifier E3X-DA-N, allows connec- display the light level, ensuring the light level change at a tion of up to 16 units.
Page 2
Reduced wiring and space requirements for Optical Communications to Prevent Mutual power lines Interference Example for 5 Amplifiers E3X-NA Series Optical communication between amplifiers prevents mutual interference. Up to 5 fiber heads can be installed closely, ex- Example for 5 Amplifiers E3X-NA series cept E3X-NA#F.
XS3F-M421-405-A Standard cable 4 conductors XS3F-M422-402-A L-shaped XS3F-M422-405-A Note: Refer to page NB-6 for details. Accessories (Order Separately) Mounting Brackets End Plate Shape Applicable type Model Quantity Shape Model Quantity E3X-NA# E3X-NA#F E39-L143 PFP-M E3X-NAG# E3X-NA#V E39-L148 A-66 Photoelectric Sensors...
Page 4
2 . The values of the minimum sensing object for E3X-NA# (V) and E3X-NAG# through-beam models indicate those obtained where the sensing distance and sensitivity are set to optimum values. 3 . The value of the minimum sensing object for E3X-NA#F through-beam models indicates that obtained at the rated sensing distance with the sensitivity set to the optimum value.
General purpose Compatible Sensing distance (mm) Standard object (mm) Permissible Features Shape Amplifier (Values in parentheses: when Minimum sensing object Model bending Units (E3X-) using the E39-F1 Lens Unit) (Opaque object) Typical radius NA#(V) 400 (3,000) 1.0 mm dia. (0.03 mm dia.) NAG# E32-TC200 75 (550)
Page 6
2 . The values of the minimum sensing object for E3X-NA# (V) and E3X-NAG# through-beam models indicate those obtained where the sensing distance and sensitivity are set to optimum values. 3 . The value of the minimum sensing object for E3X-NA#F through-beam models indicates that obtained at the rated sensing distance with the sensitivity set to the optimum value.
Page 7
Side-view Compatible Sensing distance (mm) Standard object (mm) Permissible Features Shape Amplifier (Values in parentheses: when Minimum sensing object Model bending Units (E3X-) using the E39-F1 Lens Unit) (Opaque object) Typical radius NA#(V) 1.0 mm dia. Free-cut 3-mm dia. (0.03 mm dia.) Long-distance NAG# E32-T14L...
Page 8
E32-T81F 10 mm Operating am- 6-mm dia. bient tempera- 1.0 mm dia. NA#F ture: -40 to (0.5 mm dia.) +200°C * Teflon is a registered trademark of Dupont Company and Mitsui Dupont Chemical Company for their fluoride resin. E3X-NA A-71...
Page 9
Heat resistant Compatible Sensing distance (mm) Standard object (mm) Permissible Features Shape Amplifier (Values in parentheses: when Minimum sensing object Model bending Units (E3X-) using the E39-F1 Lens Unit) (Opaque object) Typical radius Free-cut 1.5 mm dia. 150°C *1 NA#(V) (0.03 mm dia.) Operating am- bient tempera-...
Page 10
2 . The values of the minimum sensing object for E3X-NA# (V) and E3X-NAG# through-beam models indicate those obtained where the sensing distance and sensitivity are set to optimum values. 3 . The value of the minimum sensing object for E3X-NA#F through-beam models indicates that obtained at the rated sensing distance with the sensitivity set to the optimum value.
Page 11
Area sensing Compatible Sensing distance (mm) Standard object (mm) Permissible Features Shape Amplifier (Values in parentheses: when Minimum sensing object Model bending Units (E3X-) using the E39-F1 Lens Unit) (Opaque object) Typical radius 2.0 mm dia. NA#(V) (0.03 mm dia.) Multi-point de- E32-M21 25 mm...
Page 12
100 x 100 NA#(V) (0.01 mm dia.) Free-cut 3 mm dia. 25 x 25 NAG# E32-D22L (small diame- (0.1 mm dia.) 3-mm dia. ter) 25 x 25 NA#F (0.015 mm dia.) * Sensing distance indicates values for white paper. E3X-NA A-75...
Page 13
General purpose Compatible Standard object (mm) Permissible Features Shape Amplifier Sensing distance (mm) Minimum sensing object Model bending Units (E3X-) (Gold wire) typical radius 200 x 200 NA#(V) (0.01 mm dia.) 50 x 50 NAG# E32-DC200 25 mm Free-cut (0.1 mm dia.) M6 screw 75 x 75 NA#F...
Page 14
E32-D21B Free-cut (0.1 mm dia.) M4 screw 25 x 25 NA#F (0.02 mm dia.) 25 x 25 NA#(V) (0.01 mm dia.) E32-D22B 25 x 25 1.5-dia. NA#F (0.02 mm dia.) * Sensing distance indicates values for white paper. E3X-NA A-77...
Page 15
Free-cut Free-cut Note: 1 . indicates a unit that can be cut freely. The unit without the mark cannot be cut freely. 2 . The values of the minimum sensing object indicate those obtained at a distance where the smallest object can be sensed with the Reflective Fiber Unit. Coaxial Red light Green light...
Page 16
6-mm dia. temperature: 25 x 25 NA#F -30 to +70°C (0.03 mm dia.) *1. Sensing distance indicates values for white paper. *2. Teflon is a registered trademark of Dupont Company and Mitsui Dupont Chemical Company for their fluoride resin. E3X-NA A-79...
Page 17
Heat resistant Compatible Standard object (mm) Permissible Features Shape Amplifier Sensing distance (mm)*1 Minimum sensing object Model bending Units (E3X-) (Gold wire) typical radius Free-cut 150°C *2 Oper- 150 x 150 NA#(V) ating ambient (0.03 mm dia.) temperature: E32-ED51 35 mm -40 to +150°C M6 screw Fiber sheath...
Page 18
NA#F height differ- (0.03 mm dia.) ence detection 25 mm 25 x 25 Protective NA#(V) (0.015 mm dia.) structure: IEC E32-L25A 25 x 25 60529 IP50 NA#F (0.03 mm dia.) * Sensing distance indicates values for white paper. E3X-NA A-81...
Page 19
Fluid level detection Compatible Standard object (mm) Permissible Features Shape Amplifier Sensing distance (mm) Minimum sensing object Model bending Units (E3X-) (Gold wire) typical radius Fluid contact NA#(V) type Unbend- E32-D82F1 able section 40 mm E32-D82F2 L = 150, 350 NA#F mm (2 types) NA#(V)
Page 20
Approx. 55 g 65 g state) Case PBT (polybutylene terephthalate) Material Polyethersul- Polyethersul- Cover Polycarbonate Polycarbonate fone (PES) fone (PES) Accessories Instruction manual * If 8 or more Units are installed side-by-side, the response time will be 350 ms max. E3X-NA A-83...
Page 21
Approx. 25 g state) Characteristic data (typical) Number of Turns of Sensitivity Adjuster vs. Sensing Distance E32-T11L E32-D11L E3X-NA # (V) E3X-NA # (V) E3X-NA # F E3X-NA # F Number of turns Number of turns Sensing Distance vs. Hysteresis...
Wire, outer Connector cable conductors Class Application jacket color pin No. Brown White Power Brown Blue supply (+V) Black White For DC Power XS3F-M421-402-A XS3F-M422-402-A Blue XS3F-M421-405-A XS3F-M422-405-A supply (0 V) Black Output Note: Pin 2 is not used. E3X-NA A-85...
Operation series, mutual interference prevention is not activated. Indicator status Mounting In addition to the operation indicator (orange), E3X-NA has in- Connection/removing of amplifier units dicators that denote the incident level (4 green and 1 red indi- (Connection) cators). Use them for optical axis adjustment and mainte- 1.
Page 24
Two holes for thin fiber Three holes for standard Insertion position fiber (2.2-mm dia.) Lock Button Approx. 0.5 mm Finished state (proper cutting Insertion direction state) Note: Insert the fiber in the direction indicated by Fiber insertion mark the arrow. 10.7mm Fiber E3X-NA A-87...
Page 25
Connection E39-F11 Sleeve Bender • Do not strain the fiber unit, e.g. do not apply tensile or com- • The bending radius of the stainless steel tube should be as pression force. (Within 9.8 Nm or 29.4 Nm) Use special care large as possible.
Page 26
• The Fiber Units should be as close as possible when they are connected. Sensing distance will be reduced by approx- imately 25% when fibers are connected. Fiber Unit • Only 2.2 mm dia. fibers can be connected. Protective Toothed washer Spiral Tube E3X-NA A-89...
Note: * 1. The mounting bracket can also be used on side A. * 2. The hole for optical communications is for 22.4 preventing mutual interference. There is no hole for E3X-NA # F models. Amplifier Units with cables, CAD file E3X_10...
Need help?
Do you have a question about the E3X-NA and is the answer not in the manual?
Questions and answers