Disinfecting - Omron Comp A-I-R NE-C801KD Instruction Manual

NE-C801S-KDAP(V)_A_M.book Page 17 Tuesday, July 23, 2013 12:23 PM
4.2

Disinfecting

Always disinfect the parts after the last treatment of the day. If the parts are heavily stained,
replace them with new ones.
To select a method for disinfection, refer to the table on page 18.
Caution:
Do not use an autoclave, EOG gas sterilizer or low temperature plasma sterilizer.
Note: The printing may come off the surfaces of kids accessories as a result of repeated washing and
disinfecting.
Handling the Vaporizer Head
The vaporizer head is an important part that is used to
vaporize medication.
Be sure to observe the following precautions when handling it.
Notes:
• Always wash the vaporizer head after each use.
• Do not use a brush or pin etc., to clean the parts.
• When disinfecting the parts by boiling, be sure to boil them in plenty
of water.
• Do not boil vaporizer head together with other objects, other than
applicable nebulizer accessories.
• Do not use a microwave oven, dish dryer or hair dryer to dry parts.
4. Cleaning and disinfecting
Baffle
Vaporizer Head
EN
17