6.
shown on the figure to the right to begin aspiration.
Caution:
prevents the sucked mucus from entering parts other than the collection chamber.
7. Place the nozzle at the entrance of one of the nostrils of the baby. (do not insert
8.
from the power outlet.
9. Disconnect the aspirator from the air tube and disassemble it into 3 parts as
Cleaning and daily disinfecting
Cleaning
prevent inefficient nebulization or aspiration and reduce the risk of infection. Do not
use a brush or pin to clean.
• Washable parts: Nebulizer kit, Baby Mask (PVC), Nasal Aspirator, Mouthpiece
aspirator after some 100 to 120 treatments or after about 20 boiling cycles.
• Non-washable parts: Compressor, Air Tube (PVC)
Air Filter
Disinfecting
Always disinfect the parts after the last treatment of the day. If the parts are heavily
the table below.
12