Straight-Through Twisted-Pair Cable For 1000 Mbps Network Connections - HP 1810-8 Installation And Getting Started Manual

Specifications
Twisted-Pair Cable/Connector Pin-Outs
N o t e
.
A-12
Straight-Through Twisted-Pair Cable for
1000 Mbps Network Connections
1000BASE-T connections require that all four pairs of wires be connected.
Cable Diagram
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2
on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6
on connector "B".
Pins 4 and 5 on connector "A" must be wired as a twisted pair to pins 4 and 5
on connector "B".
Pins 7 and 8 on connector "A" must be wired as a twisted pair to pins 7 and 8
on connector "B".
Pin Assignments
For 1000BASE-T operation, all four pairs of wires are used for both transmit
and receive.