NEC DSX User Manual page 9

Set Up A Conference (Telephone Meeting)
To set up a telephone meeting:
1. Place or answer your first call (Intercom or outside caller) + Press
2. Place or answer your next call (Intercom or outside caller) + Press
3. Press
CONF
– Repeat step 2 to add additional callers to your Conference.
– If you hear an error tone after trying to add another party, your Conference is full.
– To place a Conference on Hold, press
– If you Conference with two outside callers, you may be able to hang up and have them continue
their conversation in an Unsupervised Conference .
Forward Calls To A Co-Worker or Voice Mail
To forward (reroute) your calls to a co-worker or voice mail:
1. While idle, push
– Your display shows the current Call Forward setup, if forwarding is On or Off, or None if disabled.
To change your Call Forwarding settings, push Edit.
2.
Next
3. Push to scroll to the Call Forwarding type you want to set up.
– Immediate.
– Ring No Answer.
– Busy No Answer.
– Off Premise Speed Dial.
– Off Premise Number.
– Answer Machine Emulation.
– Display Message.
– None.
3. For the selected type, push
setting the destination:
– Dial a co-worker's extension number or
– Press
V-MAIL
Save
4. Push to save your entries, then
– Call Forwarding will only forward outside calls that directly ring your phone (such as calls trans-
ferred from a co-worker or from your Automated Attendant).
again to set up the Conference.
Menu + Dial + Select.
60
Select
and follow the on-screen guidance to enter the options. When
to forward your calls to your mailbox.
. To reinstate the Conference, press
HOLD
for the operator.
0
Back Exit
+ to exit.
.
CONF
.
CONF
.
CONF
9