NEC DSX User Manual page 19
Multibutton telephone
Hide thumbs
Also See for DSX:
- Software manual (984 pages) ,
- Feature handbook (192 pages) ,
- Quick reference (32 pages)
Table of Contents
Advertisement
(The following steps apply if you have turned notification on for the first time or have pushed Dest.)
Part B: Select the Destination
1.
Select the notification destination: 1 (Dest1), 2 (Dest2), 3 (Dest3), 4, or 5.
– If your system does not allow Cascading Message Notification, you will only see 1 (Dest1).
When you see Number on the second display line, do one of the following:
2.
Enbl
– Push
to enable the notification destination.
Disbl
– Push
to disable the notification destination.
– Push
Chnge
to edit the notification number.
(The following steps apply if you pushed
Part C: Enter the Destination Information
1.
Dial the notification start hour.
– The entry is 2 digits (
2.
Dial the notification stop hour.
– The entry is 2 digits (
3.
Select the notification type:
Num
– Push
to have voice mail notify you at your cell phone or home office.
Pager
– Push
to have voice mail notify you on your digital pager.
4.
Dial your pager, cell phone, or home office number + Push OK.
– For help with the number you should dial, see your System Administrator.
Req
5.
Push
to have your Security Code required for this destination; push
6.
Enter the number (01-99) of Busy Attempts.
– This is the maximum number of times (normally 5) voice mail will try a busy number.
7.
Enter the number (01-99) of Ring No Answer attempts.
– This is the maximum number of times (normally 5) voice mail will try an unanswered destination.
You automatically go back to Part B Step 2 . Do one of the following:
8.
– Enable, disable, or change the notification entry.
Back
– Push
repeatedly to back up to previous steps.
Cascading Message Notification
Chnge
to edit the notification entry.)
-
) +
(
) for AM or
01
12
A
2
-
) +
(
) for AM or
01
12
A
2
(
) for PM.
P
7
(
) for PM.
P
7
NoReq
if not required.
19
Hide quick links:
Advertisement
Table of Contents
