Dai (Direct Audio Input) - oticon BTE series Instructions For Use Manual

DaI (Direct audio Input)

If your hearing instrument is connected by means of a DAI adaptor with an external
sound source, like a media player/MP3 or hand mic, the signals of these devices will
be directly transferred to your hearing instrument.
Mounting of the DAI adaptor
Start by opening the battery door, slide the DAI adaptor
onto the instrument.
Then insert the DAI cord into the adaptor.
When the DAI adaptor is connected, the instrument
will automatically switch to a combination of DAI and
microphone input of the instrument.
Instrument
DAI adaptor
Connector
24
If you would like the DAI input alone, you can switch to the next program by using the
program switch button.
As long as the DAI adaptor is connected to the instrument two programs will automati-
cally be added after the standard programs, which have been programmed into your
hearing instrument by your Hearing Care Professional.
Important notIcE
When the DAI is connected to mains-operated equipment, this equipment must
comply with IEC-60065, IEC-60601 or equivalent safety standards.
25