Dai Direct Audio Input (Optional Accessory) - oticon sensei BTE312 Instructions For Use Manual

DAI direct audio input (optional accessory)

The DAI adapter is a connector that allows you to input audio signals directly to your
hearing aid.
The DAI adapter is mounted on the hearing aid and is connected by a cord to an external
sound source, like a radio, music player or hand microphone.
Attaching the DAI adapter
Start by opening the battery door and slide the DAI
adapter onto the hearing aid.
Then insert the DAI cord into the adapter.
When the DAI adapter is connected, the hearing aid will
automatically switch to a combination of a DAI program
and the microphone input of the hearing aid.
Hearing aid
DAI adapter DAI cord
connector
36
If you would like to turn off the hearing aid microphone input and listen to the DAI alone,
you can advance to the next program by using the program switch button.
As long as the DAI adapter is connected to the hearing aid, two DAI programs will
automatically be added after the standard programs which have been programmed into
your hearing aid by your hearing care professional.
You can still use any of the standard programs while the DAI adapter is connected.
The already installed programs remain at their original program numbering and can be
selected by switching forwards or backwards in the program cycle.
IMPORTANT NOTICE
When the DAI is connected to an audio source plugged into a wall outlet, the audio
source must comply with IEC-60065, IEC-60950 or equivalent safety standards.
37