Dai (Direct Audio Input) - oticon BTE 312 Instructions For Use Manual

DaI (Direct audio Input)

If the hearing instrument is connected by means of a DAI adaptor with an external sound
source, like a media player/MP3, body-worn FM receiver or hand mic, the signals of these
devices will be directly transferred to the hearing instrument.
mounting of the DaI adaptor
Start by opening the battery door, slide the DAI adaptor
onto the instrument.
Insert the DAI cord into the adaptor.
If the hearing instrument has only one program and
the DAI adaptor is connected, it will automatically switch
to a combination of a DAI program and the microphone input
of the instrument,or DAI only, depending on configuration.
Instrument
DAI adaptor
Connector
26
If the program push-button is enabled and you or your child wants to toggle between
DAI programs, simply shift back and forth using the push-button.
As long as the DAI adaptor is connected to the instrument two programs (DAI + micro-
phone and DAI only) will automatically be added after the standard programs, which have
been programmed into the hearing instrument by the Hearing Care Professional.
If enabled, the push button of the hearing instrument can at any time be used to switch
back and forth between standard programs and DAI programs.
ImPortant notIcE
When the DAI is connected to mains-operated equipment, this equipment must
comply with IEC-60065, IEC-60601 or equivalent safety standards.
27