The Pin-Code System; Activate The Pin-Code System - Bang & Olufsen BeoSound 9000 Reference Book

36
You can protect your BeoSound 9000
by entering a four-digit PIN (Personal
Identifi cation Number) code. Should
your BeoSound 9000 be
disconnected from the mains for
more than 30 minutes, only those
who know your PIN-code can gain
access to your BeoSound 9000.
If the PIN-code is not entered, the
BeoSound 9000 automatically
switches to standby after 3 minutes.
To activate the PIN-code system, to
change your code or to delete it
altogether, your BeoSound 9000
must be in stand-by mode.
If you should lose or forget your code,
contact your Bang & Olufsen retailer
for a master code that disables your
PIN-code and gives you access to
your BeoSound 9000.
*NOTE! It is also possible to enter the digits using
the number keys 0 – 9 on your Beo4 remote
control.

The PIN-code system

Activate the PIN-code system

While the BeoSound 9000 is in stand-by
mode you can set up the PIN-code.
p
Press twice followed
p
by PAUSE to activate
PAUSE the PIN-code function.
NEW PIN The display shows
NEW PIN for 1.5 sec....
PIN _ _ _ _
...then you can enter a
PIN-code
m
Press to select a digit*
p
OK Press to accept the digit
The digit is replaced by a and the next under-
score blinks. Continue to enter the last three digits
in the same manner.
If you wish to change the entered digits...
RESET Press to start entering
from the beginning
When the PIN-code has been entered...
OK Press to accept the PIN-
code. The display shows
CONFIRM for 1.5 sec....
CONFIRM
PIN _ _ _ _
...then re-enter the PIN-
code
OK Press to confi rm the PIN-
code
The display shows that
STORED
your setting is stored
If an incorrect code is entered the second time
you must set up the PIN-code from the beginning.
Change or delete your PIN-code
While the PIN-code function is turned on you
can always make changes to the PIN-code.
p
Press twice followed
p
by PAUSE to activate
PAUSE the PIN-code function
PIN _ _ _ _
Enter the current PIN-
code. The display shows
NEW PIN?
NEW PIN?
m
Press to choose from
p
the two options
NEW PIN? NEW PIN? or PIN OFF?
PIN OFF?
Select NEW PIN? to change your PIN-code
PIN _ _ _ _
Enter the new PIN-code
OK Press to accept the new
CONFIRM PIN-code. The display
shows CONFIRM for 1.5
sec....
PIN _ _ _ _
...then re-enter the new
PIN-code
OK Press to confi rm the
new PIN-code
The display shows that
STORED
your new PIN-code is
stored
Select PIN OFF? to delete your PIN-code...
The PIN-code function is
DELETED
disabled and the display
shows DELETED for 3 sec.
For security reasons it is only possible to change or
verify the PIN-code fi ve times within a period of 3
hours. If an incorrect code is entered fi ve times,
BeoSound 9000 is turned off, and must be left in
stand-by mode for 3 hours, before you may try
again.