Table of Contents
Advertisement
12
When you have fi nished the setting
up procedure, the BeoSound 9000 is
ready for use.
Keep BeoSound 9000 in stand-by
mode to facilitate easy access and to
ensure that Clock and Timer settings
are always available.
Getting started
Close-up operation panel
In order to make reading easier in all
placement situations, you can rotate the
close-up operation panel (and thus the
display):
> Turn off the power.
> Open the lid to gain access to the close-up
operation panel.
> Lift off the operation panel by inserting a fi nger
where indicated, lift the panel out, rotate it,
and insert it again (connectors fi rst).
When you turn on the BeoSound 9000 a tiny
red light appears in the display, indicating
that the system is in stand-by mode, ready to
be used.
> Press the load button to open the glass door.
> Remove the carton strip behind the CD clamp
and the foam packing (these items are for
protection of the CD drive and the glass door
during transport).
Lift here
1
You can rotate the CD clamper lid (with the Bang &
Olufsen name) in order to ensure that the name
always appears in a horizontal position (and not
2
upside down).
Hide quick links:
Advertisement
Table of Contents
