Bang & Olufsen BeoSound 9000 Reference Book page 17

Switching the Timer function on or
off
The Timers you have programmed into the
BeoSound 9000 can all be executed with or
without activating the loudspeakers which
are either directly connected to the
BeoSound 9000 or are connected to it via
BeoLink. The Timer ON/OFF function
determines whether a Timer Play can be
heard on the loudspeakers.
ON/OFF Press to cut in or press
again to cut out the
loudspeakers
When you fi rst press
TIMER ON
ON/OFF, TIMER ON or
TIMER OFF
TIMER OFF will appear
in the display, according
to the setting you have
previously made
Choose location for the Timer
function
In order to hear your Timer play
programmings, you must activate the
loudspeakers in the room or rooms where
you want music by switching the Timer
function to ON. If you set the Timer function
to OFF, your speakers will be muted.
If you therefore choose to set the speakers
next to your BeoSound 9000 to OFF, but set
your extra speakers in your bedroom to ON,
the Timer play will be carried out, and you
will hear it through your extra speakers in
your bedroom.
However, if all Timer functions for the speakers
connected to the BeoSound 9000 as well as on all
your connected systems are set to OFF, a Timer
will not be activated.
17