Handling Your Cds - Bang & Olufsen BeoSound 9000 Reference Book

If dust builds up in the opto-coupling devices, the
CD carriage will slow down, and the cue
'CLEANING REQUIRED' appears in the
BeoSound 9000 display.
When the cue appears you must:
> Switch off the BeoSound 9000.
> Wipe dust off the two 'pegs' (A).
> Clean the inner surface of the glass door.
> Switch BeoSound 9000 on again.

Handling your CDs

IMPORTANT! If you experience any problems
when trying to play a particular CD always
check it for faults (scratches, fi ngerprints,
dust or dirt, etc.). Dust may build up on the
CDs, especially if you leave them sitting in the
BeoSound 9000 for a long time.
If there are no visible faults on the CD, please
contact your Bang & Olufsen retailer. Do not
attempt to clean the optics of the CD mechanism
yourself – this must be done by a qualifi ed
technician only!
We do not recommend using special cleaning
CDs in BeoSound 9000!
35