Sharp Zaurus SL-C3000 Instruction Manual page 96

my Zaurus SL-C3000 and SL-C3100
xlibs [xlibs_4.3.0-3_arm.ipk]
xbase-client [xbase-clients_4.3.0-3_arm.ipk]
gdk-pixbuf [gdk-pixbuf_0.22.0-2_arm.ipk]
glib [glib_1.2.10-0vl3_arm.ipk]
glib-additional [glib-additional_1.2.10-2_arm.ipk]
glibc-locale-ja-eucjp [glibc-locale-ja-eucjp_2.2.2-1_arm.ipk]
glibc-locale-ja-utf8 [glibc-locale-ja-utf8_2.2.2-1_arm.ipk]
glibc-gconv-ja [glibc-gconv-ja_2.2.2-1_arm.ipk]
glib2 [glib2_2.4.7_arm.ipk]
libgcc1 [libgcc1-zaurus_3.2.2-0_arm.ipk]
freetype [freetype_2.1.5-1_arm.ipk]
fontconfig [fontconfig_2.2.1-1_arm.ipk]
fontconfig-etc [fontconfig-etc_2.2.1-1_all.ipk]
xqt-fonts-encodings [xqt-fonts-encodings_4.3.0-3_all.ipk]
atk [atk_1.6.1_arm.ipk]
gtk [gtk_1.2.10.1_arm.ipk]
gtk2 [gtk2_2.4.13_arm.ipk]
libpng3 [libpng3_1.2.4-1_arm.ipk]
libtiff [libtiff3.6.1-1_arm.ipk]
pango [pango_1.4.1_arm.ipk]
blackbox [blackbox_0.65.0-2_arm.ipk]
rxvt [rxvt_2.6.4-1_arm.ipk]
xqtclip [xqtclip_0.0.2_arm.ipk]
xqt-startup-scripts [xqt-startup-scripts_0.0.3_all.ipk]
Once the packages are installed, do the following:
# cd /opt/QtPalmtop/bin
# su
# ln -s Xqt X
# ln -s rxvt xterm
add the following to /home/zaurus/.xinitrc
xmodmap -e "keycode 69 = slash comma"
xmodmap -e "keycode 70 = period question"
xmodmap -e "keycode 22 = minus grave"
xmodmap -e "keycode 60 = grave"
Hint: you can use the command line program xev from within X to determine the keycode of
different keys on the SL-C3000 and SL-C3100 keyboard and add the mapping with xmodmap like I
did, or alternatively, you can create a .xmodmaprc file to customize your keymaps instead:
# xmodmap -pke > /home/zaurus/.xmodmaprc
In addition, I modified .xinitrc and replaced the line:
rxvt &
with the following:
if [ -f $HOME/.xstart ]; then
XAPP=`cat $HOME/.xstart`
96 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23