Sharp Zaurus SL-C3000 Instruction Manual page 48

my Zaurus SL-C3000 and SL-C3100
Zaurus Drivers (Network)
(you only need the last option for the USB network)
Restart Windows when the install has finished.
The USB network driver is now installed and Zaurus Manager should had started automatically. If
it has not, start it manually by running "C:\Program Files\Common
Files\Sharp\SL\SSPCLINK2\ComSet.exe". You should also make a copy of C:\Program Files\Sharp
Zaurus 2\drivers, best is to zip up the whole directory. This is the Zaurus USB network driver. You
can use this driver to re-install the USB network or install it to another machine without having to
run through the whole setup process again.
Rather than carrying a floppy, CD-ROM or another USB stick around that contains the Zaurus NDIS
USB driver, you could put it on /hdd3/Documents on the Zaurus itself. When you connect your
Zaurus to a computer which has not been setup with the Zaurus NDIS USB driver before, it will
detect the Zaurus as a plain USB storage device and allow you to copy the driver from the Zaurus.
Then once you installed the driver to the computer, it will believe that it is connected to the Zaurus
via a network instead of treating the Zaurus as a dumb USB disk (provided the Zaurus is in
advanced USB mode).
48 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23