Sharp Zaurus SL-C3000 Instruction Manual page 134

my Zaurus SL-C3000 and SL-C3100
### default settings section start
# swap filename
SWAPFILE=$DEBBASE/swapfile
# swap size (in MB - 64-128)
SWAPSIZE=64
# debian diskimage file
DEBIMG=$DEBBASE/pocketworkstation
# debian size (in MB - 300 or larger)
DEBSIZE=512
# debian tarball
DEBTARBALL=zaurus-debian-jumbo-v18-b01.tar.gz
# debian documentation tarball
DOCTARBALL=zaurus-debian-doc-v18.tar.gz
# openoffice tarball
OOTARBALL=zaurus-debian-openoffice114.tar.gz
### default settings section end
You can increase the swap and pocketworkstation file sizes before you run the install script, but it is
not advised to decrease them too much.
From a command line console, do the following:
# su
# ./xqt-debian-install.sh /hdd3/debroot
Once installed, you can start Debian by tapping on the Debian icon on the Qt desktop or use the
command line:
# xlauncher debian
You will need to install sudo (refer to customisation section) if you want to run Debian as the
zaurus user or launch it via the Qt desktop icon.
The mouse function is emulated as follows:
Tapping on screen = Left Click
Fn + Shift + Tapping = Center Click
Fn + Tapping = Right Click
If you also extracted the openoffice image file, then OpenOffice will be available in Debian. You can
134 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23