Sharp Zaurus SL-C3000 Instruction Manual page 55

my Zaurus SL-C3000 and SL-C3100
# vi /etc/inetd.conf
ftp stream tcp nowait root /usr/sbin/tcpd in.ftpd -l -a
# /etc/rc.d/init.d/inet restart
Make sure you use tcp wrapper as it is slightly more secure. Then enable tcp wrapper security by
creating hosts.allow and hosts.deny as follows:
# su
# echo "ALL:ALL" > /etc/hosts.deny
# echo "in.ftpd: 192.168.129., 192.168.1." >> /etc/hosts.allow
Add any IP range you want to give access to in addition to the above.
Installing Web Server
Apache
There is a few things that need to be done before you can install Apache:
# su
# mkdir -p /hdd2/ramfs/www
# ln -sf /hdd2/ramfs /mnt/ramfs
# ln -s /hdd2/ramfs/www /usr/local/apache
Now we are ready to install apache [apache-1.3.27-php-4.2.3_0.1_arm.ipk]
When apache is installed you need to do the following:
# su
# ln -s /usr/local/apache/bin /usr/local/apache/src
(you can also fix apachectl to look at the right place instead of creating a link)
You can now start apache with the following command:
# su
# cd /usr/local/apache/bin
# ./apachectl start
You can stop apache with the following command:
# su
# cd /usr/local/apache/bin
# ./apachectl stop
I have also created a opie-sh script [apachegui_0.1_arm.ipk] which allows you to stop and start
apache from the GUI. You will be required to configure sudo and add /usr/bin/apache to the allowed
list for zaurus user (see sudo).
55 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23