Sharp Zaurus SL-C3000 Instruction Manual page 76

my Zaurus SL-C3000 and SL-C3100
console and providing the required settings:
# su
# vpnc-connect
To terminate the VPN session issue the following command:
# su
# vpnc-disconnect
sudo
Don't do this on Cacko. This is for SHARP ROM only.
install sudo [sudo_1.6.3p7-2_arm.ipk]
Once sudo is installed, you will need to configure it by using the visudo command. It will allow you
to update /etc/sudoers
For example:
# visudo
root ALL=(ALL) ALL
zaurus ALL=(ALL) NOPASSWD: /sbin/ifconfig, /sbin/dhcpcd, /usr/bin/apache,
/sbin/chroot, /bin/mount, /bin/umount, /sbin/swapon, /sbin/swapoff
This uses the security conscious approach of only allowing sudo for the commands you want. If
security is not such a concern for you and you just want to be able to sudo any commands as
zaurus user without typing a password, then make it look like this instead:
root ALL=(ALL) ALL
zaurus ALL=(ALL) NOPASSWD: ALL
Emulators
Game Console Emulators
There are a few emulators for the popular game consoles for the Z. In order to use them, you will
need to install SDL libraries [libsdl_1.2.5-slzaurus20050731_arm.ipk] if you have not installed them
yet. There is also a nice front end to select and launch the game ROMs. Install the common
emulator frontend [zemufe_0.1.1-3ex_arm.ipk]. It also has several addons which allows it to
handle additional ROM types and emulators:
zemufeex-smc_1.0_arm.ipk
zemufeex-sms_1.0_arm.ipk
zemufeex-wsc_1.1_arm.ipk
Then install the emulators:
GameBoy - [zgnuboy_1.0.3-3_arm.ipk]
Nintendo (NES) - [znester_7.1-1_arm.ipk]
SuperNintendo (SNES) - [snes9x_sdl-1_arm.ipk]
76 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23