Sharp Zaurus SL-C3000 Instruction Manual page 77

my Zaurus SL-C3000 and SL-C3100
The following is the key mapping for the emulator:
You might also need to disable the key repeater while playing the games to avoid stuttering with
the sound effects. If you have keyhelper installed, then you can run the following to temporarily
disable the key repeater:
# khctl norepeat
Once you have finished playing the games, you can re-enable the key repeat by running the
following command:
# khctl repeat
psx
You can even emulate Sony Playstation on the Zaurus with the psx4zaurus emulator. It requires the
BVDD enabled SDL library. The bundle contains binaries for pdaXrom and Cacko which means you
will either need Cacko or Sharp ROM with Tetsu's special kernel as well as the latest BVDD kernel
module [bvdd_0.4.0-1_arm.ipk] and libSDL-bvdd [libsdl_1.2.5-bvdd-07-2_arm.ipk] installed.
Extract the psx4zaurus zip file and copy scph1001.bin to the same directory where you extracted
the psx4all_cacko binary. Then place the ROM files into the games_psx directory. Use the up and
down arrow keys to move between options and the x key to select an option.
zbochs
I tried running Win98 on zbochs [zbochs.tgz.gz]. It works but it is extremely slow. Too slow to be
much use anyway. However, if you are bend on trying, then get the Linux or Windows version of
bochs and use that to create a disk image with at least 250MB (Win98 will fail to install with less
than that even though Microsoft website says it needs less). Then get your Win98 CD-ROM to install
Win98 into bochs which will take about 4 hours on a 1 GHz Pentium with 512MB. Once you've done
that copy your disk image file, BIOS (BIOS-bochs-latest) and VGA BIOS (VGABIOS-elpin-2.40) to
your Zaurus. Also don't forget to copy bochsrc as well and remove the CD-ROM config. Here is a
sample bochsrc:
romimage: file=BIOS-bochs-latest, address=0xf0000
vgaromimage: VGABIOS-elpin-2.40
megs: 16
ips: 500000
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=0, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e8, irq=11
ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x368, irq=9
ata0-master: type=disk, path="c.img", cylinders=507, heads=16, spt=63
floppy_bootsig_check: disabled=1
mouse: enabled=1
vga_update_interval: 300000
keyboard_serial_delay: 250
keyboard_paste_delay: 100000
keyboard_mapping: enabled=0, map=
boot: disk
77 of 212
Key Action Key Action
Enter START a p1 (L)
Space SELECT s p2 (X)
Cancel QUIT d p3 (A)
http://www.users.on.net/~hluc/myzaurus/
Key Action Key Action
z k1 (R) y u i \ | /
x k2 (Y) g h j -
c k3 (B) b n m / | \
-
16/09/2007 12:23