Sharp Zaurus SL-C3000 Instruction Manual page 189

my Zaurus SL-C3000 and SL-C3100
When you select the reboot option from the menu, you will get prompted to confirm just like when
you select exit to quit X.
pdaXii13 startup sequence
The boot and startup process on pdaXii13 Spitz is a bit different from the standard pdaXrom
because of its small flash and follows the following sequence:
load kernel from NAND
read and mount NAND partitions
load /sbin/init interceptor from rootfs on NAND
initialize and mount MicroDrive
pivot rootfs to MicroDrive
execute /sbin/init from MicroDrive
initialise core hardware
mount internal filesystems
load kernel modules
load inittab and rc subsystem
run rc.local
run scripts in /etc/rc.d/rc3.d or /etc/rc.d/rc5.d
/etc/rc.d/init.d/local is run from either rc3.d or rc5.d
start X if runlevel 5
if using openbox/matchbox (default) load mb-applet-tasks
task applet will run /home/root/.matchbox/autoexec
once X is exited, console login is loaded
/etc/issue is displayed
when reboot is issued, scripts in /etc/rc.d/rc6.d are run
/etc/rc.d/init.d/halt is last script to be run before reboot
In pdaXii13, the boot/startup process has also been enhanced to make it easier to automatically run
a command/script or start an application. There are now three different entry points where extra
scripts/commands can be added to be automatically run at startup/bootup.
/etc/rc.d/rc.local will be run upon boot before any of the scripts under /etc/rc.d/init.d are run.
/etc/rc.d/init.d/local will be run just before X is started.
/home/root/.matchbox/autoexec will be run after X has started.
189 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23