Setting A Wash Program; Changing A Wash Program - Baumatic BDWF670SL User Manual

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent.
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button
(1).
o IMPORTANT: Wait for 5 seconds before pressing
the program selection button, otherwise the appliance
may not function correctly.
o Press the program button (4) repeatedly to choose an
appropriate wash program for the load that you are
washing. The relevant program icon will light to show
which cycle has been selected.
o Select any program options that you want to use (e.g.
delay start or half load). Press the start/pause button
(6) to begin the program.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
o A program which has just begun can be changed if it has only
been running for a short time. Otherwise, the detergent may
have already been released and will need to be refilled or the
machine may have already filled with hot water.
o To stop the current program, press the start/pause
button (6).
24