Setting A Wash Program; Changing A Wash Program - Baumatic BKDW45SS User Manual

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button (1).
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button (5) to choose an appropriate
wash program for the load that you are washing. The program
indicator lights will show you which wash program you have
currently selected.
o Press the Start/Reset (4) button and the program indicator neon
will start to blink next to the wash program that you have
selected.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
o IMPORTANT: If you open the door of the dishwasher whilst a
wash program
automatically. After closing the door of the dishwasher, press the
Start/Reset button (4). The wash program will recommence
after 10 seconds.
Changing the wash program
o Press the Start/Reset button (4) for approximately three
seconds.
o Press the program selection button (5) to choose an appropriate
wash program for the load that you are washing. The program
21
is in progress, the machine will pause