At The End Of A Wash Program - Baumatic BDWF670SL User Manual

o Then press and hold the program button (4) for
o If you open the door during a wash cycle, the machine will
automatically pause to allow you to add or remove dishes. The
program light will stop blinking and a buzzer will sound every
minute until the door is closed again.
o When the door is closed again, the appliance will continue
working after 10 seconds.
WARNING: Be careful when opening the dishwasher door as
hot steam can escape and cause burns. Care should also be
taken to ensure the dishes are not too hot to handle.
WARNING: You should NEVER open the dishwasher door when
the appliance has filled with water as the hot water may scald
you.

At the end of a wash program

o At the end of a wash program, an audible signal will sound 8
times.
o Use the ON/OFF button (1) to switch the dishwasher
o IMPORTANT: You should leave the appliance for 15 minutes
BEFORE opening the door. This will allow the steam generated
from the final rinse(s) to dry the dishes and allow the dishes to
cool.
o Carefully open the door of the appliance and leave it ajar for a
few minutes and allow any remaining steam to disperse.
o WARNING: Hot steam may escape when the door is first
opened, so care should be taken.
o Unload the dishwasher; you should take care in case any of the
items are still warm.
o It is recommended that you empty the lower basket first to avoid
any water from the upper basket dripping down and leaving
marks on dishes in the lower basket.
o IMPORTANT: If you leave the door of the dishwasher shut and
do not unload the dishwasher for a prolonged period of time,
then you may get water droplets reforming on the washload.
about 3 seconds to cancel the current program. You
can then proceed to choose another program.
off.
25