Setting A Wash Program - Baumatic BDI460SS Instruction Manual

Opening and closing the door
o Pull the dishwasher handle to open the door, continue to pull
forward until the drawer comes out of the appliance.
o IMPORTANT: The door should only be opened when the door
locked icon (N) is not lit. If the door is opened mid cycle, then
water may spill out of the machine, which may cause damage to
property and/or injury to person.
o To close the door, use the handle to slide the drawer back into
place.
o Slide the drawer back fully into position and then press in the
centre of the LED display, until you hear a mechanical click. This
is when the door of the dishwasher is shut properly.

Setting a wash program

o Pull out the basket and then load it in accordance with the
loading instructions.
o Push the basket fully back into position.
o Place one detergent tablet into the relevant location in the
cutlery basket.
o Close the door firmly, so that you hear the door lock click shut.
o Press the ON/OFF key (A) to switch the machine on, the LED
display will light up and show "P0".
Downloaded from DishWasher-Manual.com Manuals
o IMPORTANT: DO NOT close the door of
Make sure that the "Before first use" section has been
followed.
IMPORTANT: The drip tray MUST be in position before
loading the basket and setting the appliance on a wash
program. See the "cleaning and maintenance" section
for more information.
the dishwasher without using the handle.
Otherwise there is a risk of trapping your
fingers.
21