Clock Controls; Time Of Day Clock; To Set Time Of Day - Jenn-Air SVE47600 Use And Care Manual

When electrical power is supplied or after power interruption, the last clock time
displayed before power was interrupted will flash. Time will advance and continue to
flash until clock is reset.
To set Time of Day
1. Touch Clock Pad,
Indicator word TIME will flash and time digits will appear in the Display. (If morethan
fifteen seconds elapse between touching Clock Pad and touching a number pad,
the Clock Pad must be touched again in order to set clock.)
2. Touch the appropriate number pads until correct time of day appears in Display,
Note: Four to fifteen seconds after touching the number pads, the time of day will
automaticallv be entered.
IMPORTANT
• To recall time of day when another time function is showing: Touch Clock Pad,
• Clock time cannot be changed when oven has been programmed for Timed Bake,
Timed Convect Bake, Timed Convect Roast or Self-clean. Cancel program before
reprogramming clock.
22