Cooktopcartridges,either conventional c oil, halogen, radiantor solid element,can be
installedon eitherside ofthe range. (See page 51 for allavailablecartridgesand model
numbers.)
To Install Cartridges
1.
If the grill element, grin-rocksor grates are in place, remove before installinga
cooktopcartridge. Clean pomelain basinpan of any grease accumulation. (See
page 17 for cleaningrecommendations.)
2.
To installany of the optional c ooktopcartridges, b e sure controlsare turned OFF.
Position the cartridgeterminalplugtowardstheterminalreceptacle.Thisreceptacle
is located at the front of the left side and at the backof the rightside of the range.
3.
Slide the cartridge towards the receptacle until the cartridge terminal plug is
completelyengaged.
4.
Lowerthe oppositeend of the cartridge intothe rangetopuntil it is flush with the
surface. Your range is now ready to use.
To Remove Cartridges
1.
Controls must be OFF and the cartridge should be cool.
2.
Lift up on the "tab" locatedon the cartridgeuntiltop of cartridgeclearsthe opening
on the rangeby about2 inches. Liftingthe cartridgetoo highwhilestillengagedin
the receptaclecoulddamage the terminal plug.
3.
To disengageterminal,holdcartridgebythe sidesand slideawayfromthe terminal
receptacle. Liftout when fully unplugged.
4.
A storagetray, Model A350, is availableand can be used for storinga cartridge.
5.
Do not stack cartridges where they may fal[ or be damaged. Never store other
materialson top of the glass-ceramic cartridgessincethis coulddamage or scratch
the surface.
Canning should be done on the conventionalcoil cartridgeonly. Canning element
accessory,ModelA145A, makes it possible to use largecannerswiththe conventional
coil cartridge.
11