Table of Contents
Advertisement
Basic Voice Mail Programming
Selecting the Active Language
Selecting Languages
Availability:
58
VANGARD Mail/i-Series Quick Setup Guide
(1)
ENGLISH.NDX
5.
Enter to number of the language you want to assign as the primary language (e.g., 1 for
English Mnemonic) and press Enter.
6.
Enter the number of the language you want to assign as the secondary language (e.g., 4 for
Spanish) and press Enter.
7.
The VANGARD Mail will automatically restart.
VANGARD Mail version 9.08 or higher.
Beginning in software version 9.08, the order in which languages appear on the selection list has
changed. When you choose 93, Language Selections from the INSTALL SYSTEM Menu,
you will see:
The prompt files found in C:\ADPCM\OKI:
---------------------------------------------
1-ENGLISH.NDX
2-SPANISH.NDX
3-FRENCH.NDX
4-ENGL2.NDX
The numbers shown next to the languages are used only as entries for selecting a primary or sec-
ondary language. This number does not appear in any other area of programming.
The default primary language is English Mnemonic and is shown in the selections screen as
1-ENGLISH.NDX. The default secondary language is English Numeric and is shown in the selec-
tions screen as 4 - ENGL2.NDX. The primary language is referred to as Language 1 or as (1) in
other areas of Voice Mail programming. The secondary language is referred to as Language 2 or
as (2) in other areas of Voice Mail programming.
To change primary and secondary languages:
1.
From the Main Menu
Enter IN and press <Enter>.
Enter the system password if requested, and press <Enter>.
2.
3.
From the INSTALL System Menu:
Enter 93 and press <Enter>.
You will see prompts stating that this selection requires the Voice Mail be rebooted.
Enter Y when you are requested to do so.
4.
You will see status prompts on the screen. Eventually you will see:
RESTARTING...
Resource Configuration Program, Version 1.10
(c) CTL, 1998
------------------------------------------------------------
Enter... To configure >> Prompts
Any key... To continue
Program will terminate in 5 seconds.
1---5---10---15
Immediately press <Enter>.
5.
Chapter 4: Voice Mail Programming
Advertisement
Table of Contents
