NEC VANGARD i-Series Quick Setup Manual page 18

Vangard i-series;
Table of Contents

Advertisement

Installing the Voice Mail Hardware
Increasing the Number of Voice Mail Ports
10
VANGARD Mail/i-Series Quick Setup Guide
4.
Remove the screw from the bracket (if present), and remove the bracket from the standoff (see
the illustration below).
Figure 4: Removing the Bracket from the Standoff
5.
In the table below, follow only the instructions that apply to both your current number of ports
(From column) and the desired number of ports after the increase (To column).
For example, to increase the number of available ports from 4 to 8, you would insert another
4-port card.
From
2
2
2
4
4
To
4
Insert a 2-port card. or
Remove the existing 2-port card, and replace with
a 4-port card.
6
Insert a 4-port card.
8
Remove the 2-port card, and insert two 4-port
cards.
6
Insert a 2-port card.
8
Insert another 4-port card.
Chapter 2: Installing the Voice Mail
Instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

17770a-2p17770a-4p17770a-6p17770a-8p

Table of Contents