● Search through the list and press the required station to select it.
● To close the station list, press the
The station list closes automatically after a period of inactivity.
No station list is available for the AM frequency band.
Scan function (Scan)
When the scan function is running, all available stations on the current fre-
quency band are played in sequence for approximately 5 seconds each.
● Open the RADIO main menu and select a frequency band ⇒ p age 17.
⇒ F ig. 1
● Briefly press the setting knob
● OR: In the RADIO main menu, press the
the
function button in the pop-up window.
Scan
The scan function starts and the
Extras
Stopping the scan function
● Briefly press the setting knob or press the
the scan function at the station that is currently playing.
Manually selecting a station with the arrow buttons or station buttons also
stops the scan function.
The scan function will also stop if interrupted by a traffic announcement
⇒ p age 22.
function button.
.
8
function button and press
Extras
function button changes to
.
Scan
function button to stop
Scan
Tuning to a station frequency manually
Displaying the frequency dial
● Open the RADIO main menu and select the frequency band ⇒ p age 17.
● Press the
function button to display the frequency dial of the se-
Man.
⇒ F ig.
lected frequency band
9.
⇒ F ig. 1
● OR: Turn the setting knob
Adjusting the frequency in stages
● Briefly press one of the arrow buttons to the right and left of the frequen-
cy dial.
● OR: Turn the setting knob.
Quickly browsing the frequency band
● Place your finger on the slider in the frequency band and drag it
along the dial.
● OR: Briefly press a position on the frequency band. The slider will
then jump straight to the selected point.
Audio mode
Fig. 9 RADIO main menu
with the frequency dial
for the selected frequen-
cy band
one stop further.
8
19