Scan Function; Tp Traffic News - Seat MEDIA SYSTEM PLUS Owner's Manual

Manually tuning in a station frequency.
Briefly press the adjustment knob
›››
Fig. 1
12
Manual frequency selection is also
Hiding the fre-
closed if you select a station with a
quency band
memory button. If no operation is
performed, the frequency range will
disappear after a period of inactivity.
Storing stations
Press and hold the desired memory
Storing the sta- ›››
button Fig. 11 until an audible sig-
tion that is cur-
nal is heard.
rently being lis-
The station tuned in will be stored on
tened to.
this memory button.
›››
Press the Fig. 11
Station
button to open the station list.
The stations that are already stored
on a memory button are marked on
the station list with the symbol
›››
Fig. 12.
Select the desired station by press-
Storing a sta- ing and holding it on the screen. A
tion on the list screen will appear to store the sta-
of stations tion on the memory buttons.
Press the memory button where the
station is to be stored.
An audible signal is heard and the
station is stored on the memory but-
ton. To continue storing other sta-
tions from the list, repeat the proc-
ess.
Audio and Media Mode
Storing stations
All the stored stations can be deleted
Deleting stored together or separately from the
stations AM, DAB Setup
›››
page

Scan function

When the scan function is active, all availa-
ble stations on the current frequency band
are played in sequence for approximately 5
seconds each.
Starting and stopping the scan function
Starting the scan Press the
function
function and then select
Press the
stop the scan function at the station
that is currently playing.
Stopping the

scan function
Manually selecting a station with
the memory buttons or changing the
screen also stops the scan function.
Traffic news (TP)
Traffic news monitoring with the TP function
is only possible when a traffic news station is
available. Stations with a traffic news func-
tion are accompanied on the RADIO main
menu by a TP indicator
›››
Fig.
Some stations that do not broadcast their
FM,
own traffic news support the TP function by
menu
broadcasting traffic reports by other stations
24.
(EON).
Switching the TP function on and off
Using the Setup (FM, AM, DAB) menu,
●
activate  or deactivate  the
Traffic station (TP)
Active TP function and station selection
While traffic news monitoring is activated,
the letters TP will be displayed on the left-
hand side, halfway down the screen while in
function button
Settings
Audio mode
.
SCAN
ments broadcast by the current station or a
function button to

linked traffic news station will interrupt the
current audio mode.
In FM mode, the selected station must sup-
port the TP function.
If a station is selected without the TP func-
tion, the radio tries to find stations with this
function in the background. If no station is
found, this will be indicated half way up the
left of the screen
In AM mode or media mode, the unit will al-
ways automatically tune to a traffic news sta-
tion in the background, provided a TP station
›››
Fig. 11 and
12.
›››
page
by pressing it
›››
Fig. 11. Traffic announce-

.
24.
»
23