Table of Contents
Advertisement
124
Settings
Function button: effect
: the TP function is switched on ⇒ p age 22.
Traffic news (TP)
: the TMC station from which TMC traffic reports are be-
Current TMC station: ...
ing received is displayed in the function button.
Preferred TMC station
: the unit always automatically searches for a TMC station.
Automatic
OR: touch to select the required TMC station from the station list. If
the selected TMC station can no longer be received, the system auto-
matically searches for a TMC station.
: DAB traffic announcements are played in the
DAB traffic announcements
same way as TP traffic announcements in all operating modes.
: DAB announcements (news, sport, weather,
DAB: other announcements
warnings etc.) will interrupt the current DAB radio mode.
: automatic station tracking within the DAB fre-
DAB programme tracking
quency range is activated.
: switching to FM frequency band is allowed for
Automatic switch DAB<>FM
automatic station tracking.
: L-band is activated (low-range station frequencies for local
DAB L-band
reception).
: when
Deleting the preset list
deleted.
Media settings
● Press the
unit button.
SETUP
● Press the
function button.
Media
is touched, all stored radio stations are
Delete
Function button: effect
Activate AV input a)
: it is possible to switch to an AV input in the video
menu.
: The
function button is active in the Audio menu.
Enable AUX Input
AUX
menu ⇒ p age 41.
Press it to open the
AUX
Play Bluetooth audio automatically
cally when playback is started on the connected Bluetooth media player
⇒ p age 41.
: Adjust the input volume for an external audio source (AUX)
AUX input level
or an iPod™ connected to the MEDIA-IN multimedia interface (MDI) to the
output volume of the other audio sources.
: no track information is displayed even if availa-
Deactivate artist/title name
ble.
Scan/mix/repeat including subfolders
ted playback mode. This setting must be defined before the playback
mode is activated.
a)
Can only be displayed or is only enabled in units with a TV receiver.
Adjusting the output volume
If you need to increase the output volume of a connected audio source, first
lower the base volume on the radio-navigation system.
If the sound from the external audio source is too quiet, if possible, in-
crease the output volume on the audio source. If this is not sufficient, set
the input volume
AUX input level
If the sound from the connected external audio source is too loud or distor-
ted, if possible, lower the output volume on the audio source. If this is not
sufficient, set the
AUX input level
: Bluetooth audio playback starts automati-
: subfolders will be included in the selec-
to
or
.
Medium
Loud
to
or
.
Medium
Quiet
- Quick Links:
- Voice Control
Hide quick links:
Advertisement
Table of Contents
