Scan Function (Scan); Traffic Information (Tp); Active Tp Function And Station Selection; Incoming Traffic Information - Seat ibiza Owner's Manual

Storing stations
Storing a sta- Press the function button to
Stations
tion on the open the list of stations. Select the de-
list of sta- sired station (by holding a finger on the
tions touchscreen or holding down the setup
button) until the store display appears.
Press the memory button and, after the
confirmation tone, the station will then
be recorded on this memory button.
To store more stations from the list,
press Back and repeat the process.
Deleting a The stored stations can be deleted one
stored sta- by one or all at once in the FM, AM and
tion DAB setup menu.

Scan function (SCAN)

When the scan function is running, all availa-
ble stations on the current frequency band
are played in sequence for around 5 seconds
each.
Starting the scan function
Press the function button
●
Setup
select .
SCAN
End station scan function
● Press the  function button to stop the
scan function on the station you are listening
to.
● OR: Briefly press the setup button. The
scan function also ends when you manually
select a station using the stored station but-
tons, or when a traffic announcement comes
in.

Traffic information (TP)

Traffic news tracking with the TP function is
only possible if the TP station is available.
The traffic announcement stations are indica-
ted in the Radio main menu and in the list of
stations by displaying TP
›››
Fig. 9.
Some stations that do not have their own
traffic news support the TP function by broad-
casting traffic announcements from other
stations (EON).
Switching the TP function on and off
● In the menu Setup (FM, AM and
press the function button
DAB),
Traffic Program (TP)
›››
 this function
and then
If the station you are listening to at that time
does not support the TP function,
displayed halfway up the left of the screen.

Active TP function and station selection

While the traffic news tracking is running, in
audio mode TP will be displayed half-way up
the screen on the left. In this case, the traffic
announcements of the current station or of
Radio
›››
Fig. 8 and
to activate  or deactivate
page 16.

will be
the station that broadcasts the correspond-
ing traffic information will be played.
In FM mode, the station tuned in must have
the TP function. If, after activating the TP
function, you manually select or use the stor-
ed station buttons to select a station that
does not support the TP function, it will not
check for traffic announcements (display:
 ).
When the traffic announcement station that
is tuned in stops being received, the symbol

will also be displayed, and you must
search for a station manually.
During operation in AM or Media mode, a
traffic announcement station is always set
automatically in the background, provided
there is one that can be tuned in. Depending
on your location, this process can take some
time.

Incoming traffic information

In active Audio mode, an incoming traffic an-
nouncement will play automatically.
During the traffic announcement, a pop-up
window is displayed and the radio changes,
depending on the case, to the traffic news
station (EON).
The media mode is paused and the volume is
›››
adjusted to the preset level page
»
41.
15