Tp Function (Traffic Programme) - Seat SOUND SYSTEM 1.0 Owner's Manual

TP function (Traffic Programme)

Introduction
While traffic news monitoring is on (display: TP), traffic announcements will
interrupt the current Audio mode.
On the AM frequency band, traffic news monitoring is not possible.
Additional information:
•
⇒ page 6
Safety notes
•
Unit overview ⇒ page 8
•
Radio mode ⇒ page 12
•
Settings menus ⇒ page 28
Traffic news monitoring with the TP function
Traffic news monitoring with the TP function is only possible if the TP station
is available.
Some stations that do not have their own traffic news support the TP function
by broadcasting traffic announcements from other stations (EON). Traffic
announcements broadcast by the linked traffic stations interrupt the current
Audio mode.
Switching the TP function on and off
•
Press the unit button
•
If the station that is currently selected in FM mode does not support the
TP function, the unit will automatically search for a TP station.
•
The TP function is switched off by pressing the
TP function activated
While traffic news monitoring is switched on and enabled, TP is displayed
⇒ fig.
In radio mode, the selected station must support the TP function. If a station
selected via the station buttons or manual tuning does not support the TP
function, traffic news monitoring is not possible (display: NO TP).
If the currently selected traffic news station can no longer be received, NO TP
is also displayed and you will need to start a manual station search using the
arrow buttons
During a station search with the arrow buttons or the scan function (SCAN),
the unit will only tune to stations that support the TP function.
In media mode or while the unit is muted, the unit will always automatically
tune to a traffic news station in the background, provided a TP station is avail-
able. This may take some time depending on the situation.
Fig. 12 TP function
active.
⇒ page 8, fig. 1
TP
12.
⇒ page 13.
and
Audio mode
A
.
7
unit button.
TP
17