78
Navigation
Tour mode
Introduction
In Tour mode, multiple destinations can be travelled during route guidance.
A trip with multiple destinations is called a "Tour".
A tour always consists of a destination which is the end point of the tour
and a maximum of 10 stopover destinations.
The "starting point " of a tour is always the vehicle position determined by
the navigation system.
The "destination" is the end point of a tour.
"Stopover destinations " are driven to before the destination.
"Soft stopover destinations " do not have to be reached exactly, depend-
ing on the settings.
A maximum of 10 tours can be saved in the tour memory ⇒ p age 82.
Additional information and warnings:
● Safety notes ⇒ p age 4
● Unit overview ⇒ p age 6
● Basic information on use ⇒ p age 8
● Voice control ⇒ p age 14
● Introduction to navigation ⇒ p age 58
● Entering a destination ⇒ p age 62
● Route guidance ⇒ p age 89
Entering a stopover destination
A stopover destination can be entered once a destination has been defined.
A stopover destination can also be entered during route guidance.
After the first stopover destination has been selected, the Navigation main
menu is automatically opened in tour mode
● In the Navigation main menu, press the
● OR: during route guidance, press the
map view ⇒ p age 89.
● In the pop-up window, press the
The next step is to define the stopover destination type and select the addi-
tional destination.
Fig. 67 Navigation main
menu: extras pop-up win-
dow
⇒ F ig.
70.
⇒ F ig.
function button
67.
Extras
function button in the
... /
...
function button.
New stopover destination