Wireless Lan - NEC LT265 Network Manual

7-3. Wireless LAN

When inserting the wireless LAN card into the PC card slot of the projector, use the "PC
Card" page of "LAN Mode".
Flow of Setting
Step 1 Display "PC Card" page of "LAN Mode".
Step 2 Select "Profiles".
Step 3 Enable or disable "DHCP".
If "Disabled" (without check mark)
Step 4 Input "IP Address".
Input "Subnet Mask".
Input "Gateway".
Step 5 Input "DNS Configuration".
Step 6 Setting of "Advanced".
6-1. Setting of "Network Type".
Select SSID in "Site Survey".
Input "SSID" (if necessary).
Select "Mode" (if necessary).
6-2. Setting of "WEP"
Step 7 Finalize "Advanced".
Step 8 Reconnect the network.
Step 9 Finalize the setting.
7. Setting the LAN Setting of Projector
If "Enabled" (with check mark)
If "Easy Connection" is selected
Select the number of bits of "WEP".
Select "Key Select".
Set "Key 1 to Key 4".
31