Connecting To A Wired Lan; Connecting To A Wireless Lan - NEC PE506WL User Manual

Hide thumbs Also See for PE506WL:
Table of Contents

Advertisement

Connecting to a Wired LAN

The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable.
To use a LAN connection, you are required to set the LAN on the projector menu. (→ page 55)
Example of LAN connection

Connecting to a Wireless LAN

The USB Wireless LAN Unit also provides a wireless LAN connection.
Important:
• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is
prohibited, remove the USB Wireless LAN Unit from the projector.
• Buy the appropriate USB Wireless LAN Unit for your country or area.
NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working.
• Your computer's wireless LAN adapter (or unit) must be complied with IEEE802.11b/g/n standard.
• When connecting a USB device and a network cable at the same time, there is highly possibility of interference when using a USB device
that is too large..It is recommended that users use smaller USB devices.
Attaching the USB Wireless LAN Unit
NOTE:
• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in the
reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port may break.
• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge the
static electricity from your body.
• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunction
or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power cord, and
then connect it again.
• The USB port of the projector is common use for the VIEWER. When the USB memory is installed and activate the VIEWER, you can not
utilize wireless LAN.
7. Installation and Connections
Server
Hub
LAN cable (not supplied)
NOTE: Use a Category 5 or higher
LAN cable.
80
LAN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pe456uslPe506ulPe456wsl

Table of Contents