NEC LT265 Network Manual page 20

3. Installing User Supportware 2
Installing PC Control Utility 3.0
1
Click [Installing PC Control Utility 3.0] in the menu screen.
Preparation for the installation will begin.
When preparation is complete, "Welcome to the InstallShield Wizard for PC Control Utility 3.0"
screen is displayed.
•
After that, follow the instructions on the screen to continue the installation.
•
When installation is complete, the menu screen of the User Supportware 2 CD-ROM is dis-
played again.
Completing installation
1
Click [Exit] on the menu screen.
The menu screen will close.
2
Remove the User Supportware 2 CD-ROM from the CD-ROM drive.
18