NEC LT265 Network Manual page 70

4. Viewer PPT Converter 3.0
Projecting image by using viewer function of projector
1 Turn on the power to the projector.
2
Set the flash memory card to which the converted PowerPoint file has been out-
put to the projector (
If the wireless LAN card has already been set to the projector, turn off the power to
the projector once, and remove the wireless LAN card. Then set the flash memory
card to the projector, and turn on the power to the projector.
3
Press the
The input source of the projector will change to "Viewer" and the image output to the flash
memory card will be projected.
•
To use the button of the projector, press the
•
For the operation of the "Viewer", refer to the User's Manual (in User's Manual CD-ROM).
•
To end the "Viewer", select another input signal by pressing the
the remote control.
4
When the viewer ends, remove the flash memory card from the projector
( page 24).
Do not remove the flash memory card while the PC card access indicator lights.
Otherwise, the flash memory card may be damaged.
68
page 23).
button of the remote control.
button and select "Viewer".
COMPUTER 1
button of