NEC LT265 Network Manual page 60

2. Desktop Control Utility 1.0
12
Click [OK].
A connection destination selection screen will be displayed.
If the connection destination has not been found as a result of a PC search, search for the
connection destination by inputting the IP address of the personal computer at the connection
destination, click "
13 Click the personal computer at the connection destination and then [OK].
The desktop screen of the personal computer at the connection destination will be displayed.
When the desktop screen is displayed, the on-screen menu is not displayed even if
the USB mouse is clicked. To display the on-screen menu while the desktop screen
is displayed, press the
Operating the projector (manipulating desktop screen)
The displayed desktop screen can be manipulated by using the USB mouse connected
to the projector. If the
while the desktop screen is displayed, an auxiliary operation bar is displayed at the
lower left of the screen.
Manipulate the auxiliary operation bar by using the buttons of the projector or remote
control.
58
" on the "PC Search" screen, and click "Input IP Address" and [OK].
button of the projector or remote control twice.
button of the projector or remote control is pressed