Setting The Lan Setting Of Projector; Displaying On-Screen Menu (Lan Mode) - NEC LT265 Network Manual

7. Setting the LAN Setting of Projector

For how to turn on/off the power to the projector and how to operate the buttons and
remote control of the projector, refer to "1. Introduction", "2. Installation and
Connections", and "3. Projecting an Image (Basic Operation)" of "User's Manual"
included in the User's Manual CD-ROM.

7-1. Displaying On-Screen Menu (LAN Mode)

Preparation:
Turn on the power to the projector and project images to the screen.
It is not necessary to select the signals.
1
Press the
The on-screen menu will be displayed.
2
Use the
3
Press the
The "Basic" tab will be highlighted.
4
Press the
button.
Highlight
button to select the Setup submenu.
button.
button three times to highlight the "Installation" tab.

7. Setting the LAN Setting of Projector

25