NEC LT265 Network Manual page 57

3
Input the starting password of Desktop Control Utility 1.0, and click [OK].
The "Current password" window will be displayed.
The character string displayed in the password field varies each time Desktop Control
Utility 1.0 is started.
4
Write down the character string displayed in the password field.
Write down "NDKE" in the screen example of step
5 Click [OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down
the password in step
Operating the projector (connecting personal computer)
1
Connect a USB mouse that is commercially available to the projector.
2
Turn on the power to the projector.
Set the LAN setting of the projector in advance.
4
.
PC CARD
R AUDIO IN L VIDEO IN S-VIDEO IN PC CONTROL
AC IN
2. Desktop Control Utility 1.0
3
.
USB
AUDIO OUT
LAN USB
COMPUTER 1 IN AUDIO IN COMPUTER 2 IN MONITOR OUT
55