NEC LT265 Network Manual page 39

<2> Use the
the
<3> Repeat step <2> above to input the encryption key.
The character will be input.
•
Each button on the software keyboard has the following function.
•
" " "
•
"MODE" ••••••••••••• Selects uppercase, lowercase, or special characters.
•
"SP" •••••••••••••••••• Inputs space.
•
"BS" •••••••••••••••••• Deletes one character to the left of the character insertion posi-
•
[OK] •••••••••••••••••• Finalizes the input character and closes the software keyboard.
•
[Cancel] ••••••••••••• Cancels the input character and closes the software keyboard.
•
"HEX" or "ASCII" •• Selects alphanumeric character input or hexadecimal number
13
Finalize "Advanced".
<1> Use the
The "PC Card" page will be displayed again.
14
Reconnect the network.
<1> Use the
15
Finalize the setting.
<1> Use the
The contents of the setting will be stored in the memory of the projector.
button, move the highlight to a character, and press
button.
" •••••••••••• Move the character insertion position in the encryption key field
to the left or the right.
tion in the encryption key field.
input.
•
When "HEX" is displayed, alphanumeric characters (ASCII)
can be input.
•
To input hexadecimal numbers, move the highlight to "HEX"
and press the
instead of "HEX", and hexadecimal numbers can be input.
•
When hexadecimal numbers can be input, "0x" is automati-
cally displayed at the beginning of the input field.
button to highlight [OK] and press the
button to highlight "Reconnect" and press the
button.
button to highlight [OK] and press the
7. Setting the LAN Setting of Projector
button. "ASCII" will be displayed
button.
button.
37