Table of Contents
Advertisement
How It Works
Turning on the radio
Turn the
the radio displays the user MMSI number; if there is no MMSI set, the radio
displays MMSI not entered.
When it powers on, the radio selects the last channel used.
Setting the UIC channel mode (USA/CAN/INT)
NOTE: This menu selection is hidden by default. To access this feature; Turn
on the radio while holding down SCAN and
be hidden again from the menu when power is turned off. The radio comes
preset to use the UIC channels assigned for International waters. If you are
operating in an area that uses Canadian or United States UIC channels, you
will need to change the channel mode.
1.
Press the
sub-menu.
2.
Select
3.
Highlight the channel mode you want to use: US (
Canadian (Canada mode), or international (Intl mode).
4.
Press the
and exits the menu.
How It Works
The UM425 has two basic modes of operation:
Operation mode
Normal mode
Scan mode
knob clockwise to turn on the radio. As it powers on,
VOLUME-PWR
button to display the menu, and choose the Setup
MENU-PA
USA/CAN/INT. The screen displays the UIC channel setup.
button. The radio activates the new channel mode
SELECT
What it does:
Monitors a single
marine radio
channel and lets
you talk on that
channel.
Monitors all the
channels you save
into memory.
▲
buttons. The feature will
Use it when:
You want to talk to
another station on a
specific channel.
You have a small
group of channels
you use most often
and want to check
them for traffic.
12
USA mode),
To turn it on/off:
(default mode)
Press the
SCAN-
button.
MEM
Advertisement
Table of Contents
