Turning On The Radio; Setting The Uic Channel Mode (Usa/Can/Int); How It Works - Uniden UM355 Owner's Manual

How It Works

Turning on the radio

Turn the
VOLUME-PWR
When it powers on, the radio selects the last channel used.

Setting the UIC Channel Mode (USA/CAn/InT)

Press and hold
1W/25W/UIC
Note :If the UIC mode is changed, MRN CH is set to select previous CH in each
mode. And Each of Scan mode, Triple/Dual Watch, EMG 16CH or 67CH mode and
WX mode are canceled at this time.
How It Works
The UM355 has three basic modes of operation:
Operation mode What it does:
Normal mode Monitors a single
marine radio
channel and lets
you talk on that
channel.
Scan mode Monitors all the
channels you save
into memory.
Weather mode Monitors the select-
ed weather channel
knob clockwise to turn on the radio.
to toggle between the modes, US, INT and CAN.
Use it when:
You want to talk to
another station on a
specific channel.
You have a small
group of channels
you use most often
and want to check
them for traffic.
You want to hear
the current or fore-
casted weather.
10
To turn it on/off:
(default mode)
Press .
SCAN-MEM
Press
WX/DUAL