Turning On The Radio; Setting The Uic Channel Mode (Usa/Can/Int) - Uniden UM415BK Owner's Manual

Button Press to...
1 press: Go to Channel 16.
st
2
nd
16/9-TRI
3 press: Go back to the original channel.
rd
Cancel scanning and stay on a channel.
PUSH-TO
TALK
Activate the channel scan feature; start
SCAN/MEM
scanning channels.
NOTE:
SCAN/MEM
radio.
Turn the

turning on the radio

the user MMSI number; if there is no MMSI set, the radio displays MMSI not entered.
VOLUME-PWR
When it powers on, the radio selects the last channel used.
The radio comes preset to use the UIC channels assigned for the United States. If you are

Setting the UIC Channel Mode (USA/CAN/INT)

operating in an area that uses Canadian or international UIC channels, you will need to
change the channel mode.
Press and hold - Press and hold -
1. Press and hold
2. Select USA/CAN/INT. The screen displays the UIC channel setup.
3. Choose the channel mode you want to use: US (USA Mode), Canadian (Canada Mode), or
international (Intl Mode).
4. Press
ENT-1W/25W
10 English
press: Go to Channel 9.
on the microphone functions the same as the
knob clockwise to turn on the radio. As it powers on, the radio displays
Setup Setup
to display the normal menu, and choose the Setup sub-menu.
CALL-MENU
. The radio activates the new channel mode and exits the menu.
USA/CAN/INT USA/CAN/INT
Press and hold to...
Go into Triple Watch or Dual
Watch mode (see page 18).
Talk on a channel.
Save/delete the current channel
from memory.
and buttons on the
SCAN MEM
UIC Channels UIC Channels
USA Mode USA Mode
Canada Mode Canada Mode
Intl Mode Intl Mode
Back[CLR] Back[CLR]
16 16
Select[ENT] Select[ENT]