Table of Contents
Advertisement
How It Works
Scan mode
You can save channels into memory and then use scan mode to monitor
those channels. When the radio detects a signal on a channel, it pauses on
that channel as long as the signal is received; when the transmission stops,
the radio will continue scanning.
When it detects a signal, the radio stays on the
channel until you press the
signal stops.
08
10
The radio scans about
5 channels in 1 second.
In scan mode, you can get the following information from the display (some
indicators will not always be displayed):
Transmit power
last used
All scanned
channels must
be in memory
Normal scan
mode or Triple/
Dual-watch on
Using the radio in scan mode
•
You cannot transmit while in scan mode.
•
You must have two or more channels in memory to start a scan.
•
To save a channel into memory, select the channel, then press and
hold the
display.
11
12
13
1 Watt
Memory
Scanning Channels
01,03,05,06,07,08
button for two seconds. Memory will show on the
SCAN-MEM
button or the
CHANNEL UP
07
INT
16
Resume scan
17
20
15
Channel mode
(USA, CANadian,
or INTernational)
Current
channel being
scanned
Scan list (if the
text is too long,
the line scrolls)
Advertisement
Table of Contents
