Installing The Central Processing Unit (Cpu); Figure 4.8 Placing The Cpu In The Socket - Advantech PPC-157T User Manual

4.4

Installing the Central Processing Unit (CPU)

The panel PC is equipped with a central processing unit (CPU) that can be upgraded
to improve system performance. The panel PC provides one 478-pin ZIF (Zero Inser-
tion Force) socket, or "Socket 478". The CPU must be fitted with an appropriate heat-
sink and CPU fan to prevent overheating.
Warning! The CPU may be damaged if operated without a heat sink, and if the fan
is not connected to the CPU fan power connector.
Caution! Always disconnect the power cord from your panel PC when you are
working on it. Do not make connections while the power is on as sensi-
tive electronic components can be damaged by the sudden rush of
power. Only experienced electronics personnel should open the panel
PC.
Follow these instructions to install a CPU:
1. Place the CPU carefully into the socket, taking care to align it properly.
PPC-157T User Manual

Figure 4.8 Placing the CPU in the Socket

22