MAN B&W
Alarms for UMS – Class and MAN Diesel requirements
Indicates that the sensor is required.
The sensors in the MAN Diesel column are included for Unattended Machinery Spaces (UMS), option: 4 75 27,
subject to class requirements and will be finally specified in the Guidance Values Automation for the specific
engine plant.
The sensor identification codes and functions are listed in Table 8.07.0.
The tables are liable to change without notice, and are subject to latest class requirements.
2) For turbochargers with slide bearings
Table 18.04.02a: Alarm functions for UMS
MAN B&W ME/MEC/MEGI/ME-B engines
PT 800 AL Fuel oil, inlet engine
LS 8006 AH Leakage from high pressure pipes
PT 803 AL Lubricating oil inlet to turbocharger/turbocharger
TE 806 AH Thrust bearing segment
PT 808 AL Lubricating oil inlet to main engine
TE 82 AH Lubricating oil inlet to main engine
TE 83 AH Piston cooling oil outlet/cylinder
FS 84 AL Piston cooling oil outlet/cylinder
TE 87 AH Turbocharger lubricating oil outlet from
TE 823 AH Main bearing oil outlet temperature/main bearing
XC 826 AH Bearing wear (All types except S40/35ME-B9)
XS 827 A
PDS 840 AH Lubricating oil differential pressure – cross filter
XS 850 AH Water in lubricating oil
XS 85 AH Water in lubricating oil – too high
XS 852 A
Sensor and
function
Point of location
Fuel oil
Lubricating oil
turbocharger/turbocharger 2)
(S40/35ME-B9 only)
Bearing wear detector failure (All types except S50-
35ME-B)
Water in lubricating oil sensor not ready
MAN Diesel
18.04
Page 3 of 7
198 45 838.4