Web Based Configuration Tool; Overview; Device Selection; Using Web-Based Configuration Tool - ICP DAS USA GW-5492 User Manual

3. Web Based Configuration Tool

This chapter is to describe the web structure, software operating interfaces, and configuration of
BACnet and Modbus mapping.
GW-5492/GW-5493 provides Web-based configuration for the BACnet and Modbus settings. The
functions include:

System information and configuration

Network and COMPort settings

Management and settings of Device's Points (Address) for Modbus RTU Master and TCP
Client

BACnet configuration and management

BACnet Instance and Modbus Device point Mapping management

3.1 Overview

This document is to describe the web structure, software operating interfaces, and configuration of
BACnet and Modbus mapping.
GW-5492/GW-5493 provides Web-based configuration for the BACnet and Modbus settings. The
functions include:

System information and configuration

Network and COM Port settings

Management and settings of Device's Points (Address) for Modbus RTU Master and TCP
Client

BACnet configuration and management

BACnet Instance and Modbus Device point Mapping management

3.2 Device Selection


GW-5492: BACnet/IP (Server) to Modbus RTU (Client) Gateway

GW-5493: BACnet/IP (Server) to Modbus TCP (Client) Gateway

3.3 Using Web-based Configuration Tool

Connect the GW-549x to network, and use standard web browser (Internet Explorer, Mozilla Firefox)
to launch the user interface. The default link and network settings are as followed:
Web Address: http://192.168.255.1
GW-5492/GW-5493 User's Manual
8
V1.01 2011/09/01