Table of Contents
Advertisement
IDS404 USER MANUAL
5.
The alarm memory will be erased the next time the system is
armed.
10.2 Zone Bypassed Memory
The Zone Bypassed Memory displays any zones which were
bypassed during the most recent arming cycle.
To Display Zone Bypassed Memory:
1.
Hold down
[0]
2.
The READY indicator will extinguish and the keypad buzzer will
sound briefly.
3.
Flashing zone indicators show which zones were violated during
the last armed cycle.
4.
To view any bypassed zones, press the [1] key once.
5.
Zones that have have been bypassed will have flashing
indicators.
6.
The memory status will be displayed for five seconds.
7.
The zone bypassed memory will only be erased if the [#] key is
pressed while the memory is being displayed.
10.3 Zone Tamper Memory
The Zone Tamper Memory displays any zones where a tamper
condition has occurred.
To Display Zone Tamper Memory:
1.
Hold down
[0]
2.
The READY indicator will extinguish and the keypad buzzer will
sound briefly.
3.
Flashing zone indicators show which zones were violated during
the last armed cycle.
4.
To view any tampered zones, press the [2] key once.
IDS404 USER MANUAL NO. 700-277-01A ISSUED SEPT 2004 VER 1.01
[0] then [1]
until the keypad buzzer sounds.
[0] then [2]
until the keypad buzzer sounds.
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IDS404 and is the answer not in the manual?
Questions and answers